- 989 anti-wear water-ethylene glycol
- WFtype Aqueous flame resistant lubricant
- HWF-3type High water-based hydraulic fluid
- Multifunctional detergent
- New motor vehicle antifreeze fluid
- Water treatment agent isothiazolinone derivant
- Lubo brand chlorine dioxide disinfectant
- Glutaric dialdehyde fungicide
- Multi-function high efficiency flocculation coagulant aid
- Lubo PAG water solubility quench bath
- Water-ethylene glycol complexing agent
- HFD-U Triethylhexanoin fire-resistant hydraulic oil
- LBAS7001 sulfamic acid series cement high efficient water reducing agent
- LBPCA7002 polycarboxylic acid high performance water reducer
- LB-09 high efficient cement grinding aids (liquid)
- 989 nonionic high effective antifoaming agent
Products
Isothiazolinone derivant is a new type of non-oxidizing bactericide, which is broad spectrum and newly developed. Now, it is widely used.
All kinds of indexes are as follows:
Item
|
Physical and chemical indicators |
Test method |
Appearance |
Light yellow or light green liquid |
Visual inspection |
Density ( g/cm) |
1.02-1.06 |
Densitometer determination |
PH value (1% water solution) |
2.0-5.0 |
PH value beta gage |
Active matter content% |
>1.5 |
|
Product constitute, performance, usage and matters need attention:
Isothiazolinone derivant has strong sterilization function. It has the characteristics like: easy use, small dosage, little residue and national degradation.
This product is widely used in the pollutants efficient processing of industrial circulating water system,air washer, brewery, refinery, chemical industry, etc.
This product is faintly acid, which is corrosive. One should wear rubber glove and safety goggles when use.It is packed with PVC barrel or iron barrel with plastic bag in it.
This product should be stored in room temperature, keep ventilation and avoid sunlight and freeze.
The storage period is nine months.
This product is suitable for conventional mode of transportation.
Method of application and dosage
The dosage is determined by system and water quality. Generally, 50—60ppm per ton.